• Welcome to the Community Forums at HiveWire 3D! Please note that the user name you choose for our forum will be displayed to the public. Our store was closed as January 4, 2021. You can find HiveWire 3D and Lisa's Botanicals products, as well as many of our Contributing Artists, at Renderosity. This thread lists where many are now selling their products. Renderosity is generously putting products which were purchased at HiveWire 3D and are now sold at their store into customer accounts by gifting them. This is not an overnight process so please be patient, if you have already emailed them about this. If you have NOT emailed them, please see the 2nd post in this thread for instructions on what you need to do

WIP MEC4D - Creations for Dawn 2 and Dusk 2 , work in progress

Ken1171

Ken1171

Esteemed
Contributing Artist
Don't worry, it took a while, but things are now in high gear. Things are going to happen FAST now. Just a little more patience. ^^
 
MEC4D

MEC4D

Zbrushing through the topology
Contributing Artist
Hi Guys, I am back .. but will not post much until my products are ready for release ..
The same goes for all other vendors that are under NDA.. no posts until Release .. not going to take long from now on .

Stay tuned ..
 
KageRyu

KageRyu

Lost Mad Soul
Contributing Artist
@MEC4D can you confirm if poses for Dawn2 are backward compatible or Poses for Dawn SE are foreward compatible? I ask as an interested CA who might want to repack a few WIPs as Dawn 2 projects.
 
MEC4D

MEC4D

Zbrushing through the topology
Contributing Artist
KageRyu said:
@MEC4D can you confirm if poses for Dawn2 are backward compatible or Poses for Dawn SE are foreward compatible? I ask as an interested CA who might want to repack a few WIPs as Dawn 2 projects.
Click to expand...
Hi the rigging is new so the poses probably needs to be slightly adjusted .
 
You must log in or register to reply here.
Top